Due to global supply chain issues, stock levels can change. Please contact support to verify stock levels. Call 1-800-983-1315

Howard Lighting VHA1A654APSMV000000I VHA1 6 Lamp T5 HO Fluorescent Enclosed Vapor Dust Proof Lighting Fixture NSF IP67 - Lamps Not Included

100 % of 100


Please call 1-800-983-1315 for the lowest available price
  • Wattage:
    320 Watt
  • Replacement Equiv:
    400 Watt HID Incandescent light bulb
  • Howard Industries
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
More Information
UPC 799385-99716
HID Equivalent 400 Watt HID
Mounting Height 23 - 28 Feet
Type of Area Coolers & Freezers, Gas Station & Convenience Store, Gym & Sports, Hazardous Location, Industrial & Warehouse, Large Retail & Open Areas, Parking Garage, Factory / Industrial
Ballast Factor 1.05
Certifications CUL Listed, IP65 / IP66 / IP67, Made in America, NEMA, NSF, ROHS, UL Listed, IP66
Dimmable No
Lamp Life: 30,000 Hours
CRI 85+
Dimensions 14.6" x 52" x 6"
Length 52.00"
Width 6.00"
Height 14.60"
Manufacturer Howard Lighting
Product Warranty 1 Year
Part Number VHA1A654APSMV000000I
Minimum Start Temperature -20 Deg F
Technology T5HO Fluorescent
Voltage Multivolt 120V-277V
Wattage 320 Watt
Weight Each 20.00 lbs
Fixture Length 4 Feet / 48 Inches
Bulbs Included? Bulbs Not Included

**Lamps are not included with the fixture and must be purchased separately.

Howard Lighting 6 Lamp T5 HO VHA1 Fluorescent Enclosed Vapor Dust Proof Lighting Fixture NSF IP67. VHA1 series vaporproof highbay is engineered for performance down to the smallest detail. It is fully gasketed to provide total protection from dust and moisture penetration. It withstands corrosion, splashing water, hose-directed water, damage from external ice formation, and temporary submersion. This rugged fixture operates three to six lamps and as a standard feature comes with a Howard ballast.

ShineRetrofits Input:

This fixture is equivalent to a 400 watt metal halide fixture.  This six light T5 will save about 26% energy when replacing it from a 400 watt light fixture.

These are the most well designed wet / damp rated fixtures available.  Use them in indoor or outdoor locations where light fixtures will be exposed to vapor, water, or other harsh environmental factors.  Existing HID low (<20 ft) or high (>20 ft) bay fixtures not only use lots of energy compared with today's technological standards, but HID lamps burn out quickly over time and lose their lamp life gradually until they burn out, typically within 2 years.  This leaves you not only with expensive electric bills and maintenance costs, but it leaves your building in the dark as the bulbs lose light output gradually.  You can get the same light output using 50% energy when retrofitting any HID/HPS lighting fixtures.  These water proof fixtures will enable you to not only save a lot of energy and reduce your electric bill, but T5HO lamps last 30,000 hours, or roughly 4-5 years (at typical yearly operating hours).  They also maintain 90-95% of their initial light output.  This means that you'll have a bright, maintenance free, energy efficient new lighting system in your facility for years.  Please feel free to give us a call to help you with your individual application!

* One-piece upper body; no seams to crack, break, or leak
* Reinforced fiberglass body is rugged and corrosion resistant
* 5VA Flammability Rating
* Stainless steel hardware for maximum durability
* Twelve latches for positive lens retention
* White polyethylene molded end plugs for use as knockouts
* High gloss, baked enamel reflective front
* Available 95% Enhanced Specular Aluminum Reflector
* Pressure wash up to 1500 PSI(1)

* Closed cell polyester gasket
* Poured gasket seamlessly fills channel for maximum seal
* Gasket has dry skin that will not stick to the mating surface
* High gasket compression recovery ensures a solid seal over life of fixture

* Injection molded for maximum strength and precise detail
* Frosted ends and lineal prisms on sides reduce glare
* Continuous formed perimeter provides for positive seal
* Materials: 100% Virgin Impact Resistant Acrylic Long lasting clarity and resistance to weathering
UV Stabilized Polycarbonate Maximum impact resistance

* Shipped fully wired with Howard ballast
* Easy access to wiring compartment and ballast via removable gear tray
* Gear tray tethered to housing by two lanyards for extra safety
* NEC compliant luminaire power disconnect standard
* Mounting:
Standard: two versatile V-Hook mounting brackets
Optional: wire hanging kit

* Electronic, Inherent Thermal Protection, Class P, Sound rated A
* UL Listed

Quality Assurance:
* System Tested, Designed, Approved, and Manufactured by Howard Lighting Products in Mendenhall, Mississippi.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • 1 Year Warranty
  • 400W HID Equivalent
  • IP65 / IP66 / IP67
  • Made In America Compliant
  • ROHS
  • UL Listed
© 2022 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.