Lithonia Lighting WF3 LED 8-Watt Ultra Thin 3-inch Recessed Downlight Ceiling Light Fixture Dimmable
PART# WF3-LED
Web Price
Please call 1-800-983-1315 for the lowest available price
-
Lumen:550lm
-
Wattage:8 Watt
-
-
| UPC | 889804672763 |
|---|---|
| Type of Area | Apartment Buildings, Home & Architectural, Large Retail & Open Areas, Office & Small Retail, Stairwell |
| Ballast Factor | 1.00 |
| Certifications | CSA, Energy Star |
| Dimmable | Yes |
| Lamp Life: | 36,000 Hours |
| CRI | 80 |
| Dimensions | 3.40" x 3.40" x 1.10" |
| Length | 3.40" |
| Width | 3.40" |
| Height | 1.10" |
| Lumen Output: | 550 |
| Manufacturer | Lithonia Lighting |
| Product Warranty | 5 Year |
| Part Number | WF3 Series Downlights |
| Minimum Start Temperature | -40 Deg F |
| Technology | LED - New Fixture |
| Voltage | 120V |
| Wattage | 8 Watt |
| Weight Each | 1.00 lb |
ShineRetrofits Input:
Lithonia Lighting's 3 Inch 8 Watt LED Wafer Recessed Downlight offers quick and simple installation process with high quality light output and efficiency. Slim design allows installation with just a 2 inch clearance and can operate in both indoor and outdoor residential, commercial, hospitality or multifamily applications. Only uses 8 Watts to deliver 550 lumens with a CRI of 80 and dims down to 10% to maximize energy savings. The high performance coupled with competitive affordability makes this downlight an excellent option for new construction or retrofit installations.
Intended Use:
The 3" Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovate wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing for insulation. The LED module maintains at least 70% light output for 36,000 hours. These LED Wafer downlights are intended for closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas.
Construction:
Ideal for shallow ceiling plenum since a pot light housing is NOT required. IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. Round fixture with integral edge-lit LED's. Steel spring clip for easy installation. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Not suitable for pulling wires.
Optics:
Wafer-Thin downlight edge-lit LED technology uses light guided plate to distribute light.
Polycarbonate lens provides even illumination throughout the space. Utilized 3000K and 4000K color temperature LEDs.
Electrical:
Connect directly to 120V power supply via provided UL recognized driver. Driver and Fixture Wet location approved and IC rated. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% (See page 2 for recommended dimmers). Standard input wattage is 8W ,68 lumens per watt. Actual wattage may differ by +/- 5% when operating at 120V +/- 10%.
Listings:
CSA certified to Canadian safety standards. ENERGY STAR® qualified. Wet location. Air Tight certified in accordance with ASTM E283-2004.
Warranty:
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
LED Ultra-Thin Wafer Downlight Series:
ShineRetrofits Input:
Lithonia Lighting's 3 Inch 8 Watt LED Wafer Recessed Downlight offers quick and simple installation process with high quality light output and efficiency. Slim design allows installation with just a 2 inch clearance and can operate in both indoor and outdoor residential, commercial, hospitality or multifamily applications. Only uses 8 Watts to deliver 550 lumens with a CRI of 80 and dims down to 10% to maximize energy savings. The high performance coupled with competitive affordability makes this downlight an excellent option for new construction or retrofit installations.
Intended Use:
The 3" Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovate wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing for insulation. The LED module maintains at least 70% light output for 36,000 hours. These LED Wafer downlights are intended for closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas.
Construction:
Ideal for shallow ceiling plenum since a pot light housing is NOT required. IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. Round fixture with integral edge-lit LED's. Steel spring clip for easy installation. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Not suitable for pulling wires.
Optics:
Wafer-Thin downlight edge-lit LED technology uses light guided plate to distribute light.
Polycarbonate lens provides even illumination throughout the space. Utilized 3000K and 4000K color temperature LEDs.
Electrical:
Connect directly to 120V power supply via provided UL recognized driver. Driver and Fixture Wet location approved and IC rated. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% (See page 2 for recommended dimmers). Standard input wattage is 8W ,68 lumens per watt. Actual wattage may differ by +/- 5% when operating at 120V +/- 10%.
Listings:
CSA certified to Canadian safety standards. ENERGY STAR® qualified. Wet location. Air Tight certified in accordance with ASTM E283-2004.
Warranty:
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
LED Ultra-Thin Wafer Downlight Series:
