Power 3791 Spike Driver 2000 Installation Tool
PART# POW-3791
| Dimmable | No |
|---|---|
| Manufacturer | Shat-R-Shield |
| Part Number | POW-3791 |
ShineRetrofits Input:
This SPIKE Driver 2000 by Powers Fasteners is a modified version of the 1000 tool, specifically designed to work alongside a 3/16" x 4" or 1/4" x 4" SDS carbide-tipped bit. The Driver has a recessed end that fits over the SDS bit on one side and a retractable guide on the other. To use the tool, first, drill the anchor hole using the SDS bit. Then, slip the SPIKE Driver 2000 over the SDS bit (3/16" or 1/4"). Drive the SPIKE anchor into the hole with the rotary hammer until it is flush against the fixture and reaches the required depth in the base material. As the SPIKE is driven, the guide retracts until the anchor is fully seated. Once the SPIKE is installed, remove the driver from the SDS bit and move on to drilling the next anchor hole. This process allows for efficient and accurate installation of the SPIKE anchors.
Specifications:
Guide I.D.: 1/2"
Standard Box: 1
Wt./100: 1/4
ShineRetrofits Input:
This SPIKE Driver 2000 by Powers Fasteners is a modified version of the 1000 tool, specifically designed to work alongside a 3/16" x 4" or 1/4" x 4" SDS carbide-tipped bit. The Driver has a recessed end that fits over the SDS bit on one side and a retractable guide on the other. To use the tool, first, drill the anchor hole using the SDS bit. Then, slip the SPIKE Driver 2000 over the SDS bit (3/16" or 1/4"). Drive the SPIKE anchor into the hole with the rotary hammer until it is flush against the fixture and reaches the required depth in the base material. As the SPIKE is driven, the guide retracts until the anchor is fully seated. Once the SPIKE is installed, remove the driver from the SDS bit and move on to drilling the next anchor hole. This process allows for efficient and accurate installation of the SPIKE anchors.
Specifications:
Guide I.D.: 1/2"
Standard Box: 1
Wt./100: 1/4
