Howard Lighting BAL1400TD Fluorescent Emergency Ballast 1400 Lumens
PART# BAL1400TD
Web Price
Please call 1-800-983-1315 for the lowest available price
-
Lumen:1,400lm
-
| Certifications | NEC, NFPA, OSHA, UL Listed |
|---|---|
| Dimmable | No |
| Dimensions | 13.4" x 2.4" x 1.5" |
| Length | 13.3" |
| Width | 2.4" |
| Height | 1.5" |
| Lumen Output: | 1,400 |
| Manufacturer | Howard Lighting |
| Product Warranty | 5 Year |
| Part Number | BAL1400TD |
| Minimum Start Temperature | 32 Deg F |
| Technology | Emergency Ballast |
| Voltage | Multivolt 120V-277V |
ShineRetrofits Input:
Howard Lighting's Fluorescent Emergency Ballast works with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The ballast provides a minimum of 90 minutes of emergency lighting and can be either installed inside, on top, or in the remote of the fixture.
Features:
• Works with or without an AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting.
• Operates one lamp in emergency mode for a minimum of 90 minutes.
• Provides a maximum initial lumen output of 1400 lumens.
• Dual 120/277 voltage.
• Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
• 6V long life, maintenance-free, rechargeable sealed NiCd battery.
• Internal solid-state transfer switch automatically connects the internal battery to a fluorescent lamp(s) for a minimum 90-minute emergency illumination.
• Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
• Time delay enhancement to overcome end-of-life circuit protection
• Suitable for installation inside, on top, or in remote* of the fixture.
• Can be used in both switched and unswitched fixtures.
• UL Listed for factory or field installation.
• Durable painted steel construction in white finish.
• Compact design fits most fluorescent fixtures.
• CEC: Certified to CEC under Title 20 regulations
• Five-year warranty against defects in material and workmanship (lamps excluded).
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
• UL Listed for damp locations (0°C – 50°C).
• Suitable for use in sealed and gasketed fixtures.
ShineRetrofits Input:
Howard Lighting's Fluorescent Emergency Ballast works with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The ballast provides a minimum of 90 minutes of emergency lighting and can be either installed inside, on top, or in the remote of the fixture.
Features:
• Works with or without an AC ballast to convert new or existing fluorescent fixtures into unobtrusive emergency lighting.
• Operates one lamp in emergency mode for a minimum of 90 minutes.
• Provides a maximum initial lumen output of 1400 lumens.
• Dual 120/277 voltage.
• Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
• 6V long life, maintenance-free, rechargeable sealed NiCd battery.
• Internal solid-state transfer switch automatically connects the internal battery to a fluorescent lamp(s) for a minimum 90-minute emergency illumination.
• Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.
• Time delay enhancement to overcome end-of-life circuit protection
• Suitable for installation inside, on top, or in remote* of the fixture.
• Can be used in both switched and unswitched fixtures.
• UL Listed for factory or field installation.
• Durable painted steel construction in white finish.
• Compact design fits most fluorescent fixtures.
• CEC: Certified to CEC under Title 20 regulations
• Five-year warranty against defects in material and workmanship (lamps excluded).
• Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, Local and State Codes.
• UL Listed for damp locations (0°C – 50°C).
• Suitable for use in sealed and gasketed fixtures.
